Teac A-2340 - Specifications

340
ds
1 Size
e Speed
rs
and Flutter
quency Response
nal to Noise Ratio
nonic Distortion
sstalk
reo Channel Separation
t Winding Time
uts
puts
er Requirements
er =oons
ght
ndard Accessories
Three, 4 track-4 channel and 2 channel, stereo or mono
(with SIMUL-SYNC switch)
erase, record and playback
7" and 5"
7-1/2 ips and 3-3/4 ips ( + 0.5%)
] dual speed hysteresis synchronous capstan motor
2 eddy current induction reel motors
0.08% at 7-1/2 ips
0.10% at 3-3/4 ips
30 - 22,000 Hz (+3 dB, 40 - 18,000 Hz) at 7-1/2 ips
30 - 16,000 Hz (+3 dB, 40 - 10,000 Hz) at 3-3/4 ips
55 dB .
1% at 1,000 Hz normal operating level
60 dB at 1,000 Hz
50 dB at 1,000 Hz
90 seconds for 1,200 feet
Microphone: 0.25 mV/ -72 dB (600 - 10,000 ohms)
Line ; 0.1 V, 50,000 ohms or more
Line : 0.3 V for load impedance of 10,000 ohms
or more :
Headphones: 8 ohms
100/117/200/220/240 V AC, 50/60 Hz, 140 W
18-3/4"(H) x 17-5/16"(W) x 8-3/4"(D)
[ 475(H) x 440(W) x 220(D)mm]
46-1/4 lbs, [21 kg] net
Empty reel, Input-output connection cord, Oi], Fuse,
Cleaning stick, Silicone cloth, Rubber feet,
AC power cord, Vinyl cover, Splicing tape
cifications were determined using low noise tape.
tures and specifications subject to change without notice.