EasyManua.ls Logo

Teac PowerMax-HP10 - Specification 5.1-Channels Amplifier; Specification 5.1-Channels Headphone; Specification Microphone

Teac PowerMax-HP10
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40 | PowerMax-HP10
SPECIFICATION 5.1-CHANNELS AMPLIFIER
Compatible to DVD, PC, VCD, CD, TV, MP3, CD-R, CD-DA
Audio Inputs AUX (Stereo) 1 Set
DVD (5.1-channel) 1 Set
Audio Outputs 6 Channels 1 Set
Audio Specifications Front, Rear, Center. 20Hz-20kHz
Subwoofer 20Hz-120Hz
Signal/Noise ratio >=80dB
Selection >-60dB
Distortion <0.5%
Power supply AC/DC power supply 230/7.5V, 500mA, 3.75W
USB power 5.0V, 500mA, 2.5W
Dimensions (W x D x H) 90 x 155 x 143 mm
Weight amplifier approx. 450g
Operation Temperature 0-40 °C
Operation Humidity rel. <90%
Weight cables approx. 100g
SPECIFICATION 5.1-CHANNELS HEADPHONE
Power capacity 500mW x 6
Weight approx. 300g
Speaker Driver Front Diameter 40 mm (x 2)
Impedance 64 Ohms
Frequency Range 20Hz-20k Hz
Speaker Driver Rear Diameter 30 mm (x 2)
Impedance 32 Ohms
Frequency Range 20Hz-20k Hz
Speaker Driver Center Diameter 30 mm (x 2)
Impedance 32 Ohms
Frequency Range 20Hz-20 k Hz
Speaker Driver Vibration Diameter 30 mm (x 2)
Impedance 8 Ohms
Frequency Range 20Hz-120 Hz
SPECIFICATION MICROPHONE
Type Electret-Capsule 9.7mm
Weight approx. 30g
Directivity Omnidirektional
Impedance 2200 Ohms +/- 15%
Sensitivity 60dB +/- 2dB
Frequency Range 30Hz- 16,000Hz
Operation Voltage nominal 4.5V

Related product manuals