Teac R-3 User Manual

24
Timer 2
To turn the timer off
Press and hold the ALARM button for
more than 2 seconds.
Current time and the alarm status will
appear on the display.
Turn the MULTI JOG knob to select
the alarm OFF and then press the
ENTER button.
Press the ENTER button to complete
the setting.
‘’ disappears from the display .
3
2
1
TUNING/
MULTI JOG
ALARM
ENTER
To check the timer setting
Press the ALARM button briefly.
Clock and the alarm status will appear on
the display.
When the timer is ON:
When the timer is OFF:
<
To exit the checking mode, press the
ALARM button again or leave the unit idle
for 5 seconds.
Clock
Selection of
source or buzzer
Set time

Teac R-3 Specifications

General

Brand	Teac
Model	R-3
Category	Radio
Language	English