Teac R-3 - Snooze Alarm Operation; Stopping Timer Functionality

25
To stop the timer working
If you want to stop the timer working
after the timer has turned on the unit,
press the ALARM button or the
STANDBY/ON button.
The timer will work again after 24 hours.
Snooze Function
After the timer has turned on the unit,
press the SNOOZE button.
‘z’ will appear on the left of ‘ ’ o n the
display and the unit enters STANDBY
mode. After 5 minutes, the unit will turn
on again.
You can use this function repeatedly for
up to 60 minutes.
<
Note that if you press the ALARM button
to stop snoozing, the timer is also turned
off.