Teac WX-7000 User Manual (English)

Other manuals for Teac WX-7000

Owner's Manual88 pages

Instruction Manual72 pages

Questions and Answers:

C
ccampbellAug 17, 2025
What to do if the Teac WX-7000 Voice Recorder shows 'Inserted media is not supported'?
- T
  tyrone28Aug 17, 2025
  If your Teac Voice Recorder displays the message 'Inserted media is not supported', the problem may be due to several reasons. First, ensure that the media you are using is compatible with the WX-7000. Second, check whether the media has been formatted by the WX-7000. When formatting media for the first time, format it using the WX unit. Finally, verify that you are using media that has been confirmed to work with the WX-7000.
R
Randy FlowersAug 20, 2025
Why WX Navi does not recognize the Teac Data Loggers WX-7000?
- B
  Brandon CowanAug 20, 2025
  If WX Navi isn't recognizing your Teac Data Loggers WX-7000, check these things: * Make sure the LAN cables are properly connected. * Verify that the IP address and subnet mask settings are correctly configured. * Ensure that the computer’s firewall isn't blocking it. * Try turning the WX-7000 power off and on again, then restart WX Navi.
C
Curtis CookeAug 22, 2025
What to do if main unit buttons do not function on Teac Data Loggers?
- M
  meltonnicholeAug 22, 2025
  If the buttons on your Teac Data Loggers unit aren't working, here are a couple of things to check: * See if the panel is locked; if it is, unlock it. * Note that the buttons are disabled during WX-Navi operation. After interrupting transmission with WX-Navi, button use will be possible again after at least 3 minutes.
H
hollyhallAug 25, 2025
What to do if “Inserted media is not supported” message appears on Teac Data Loggers?
- B
  brownpatriciaAug 26, 2025
  If you're getting an “Inserted media is not supported” message on your Teac Data Loggers, consider the following: * Confirm that compatible media is loaded. * Check if the media has been formatted by the WX-7000. If not, use the WX-7000 to format it. * When formatting media for the first time, format it using the WX unit. * Verify that you are using media that has been confirmed to work with the WX-7000.
P
Patrick WilsonAug 28, 2025
How to fix Teac Data Loggers if power will not turn on?
- T
  Thomas WoodsAug 28, 2025
  If your Teac Data Loggers power won't turn on, check if the power adapter is connected and that the DC power supply voltage isn't too low.
J
jamescalhounAug 30, 2025
Why cannot select the sampling frequency on Teac Data Loggers?
- M
  Melissa BishopAug 30, 2025
  If you cannot select the sampling frequency on your Teac Data Loggers, ensure that the number of channels is not set to more than what the recording media supports.
C
Christopher GonzalezSep 1, 2025
What to do if RDX cartridge not recognized on Teac Data Loggers?
- P
  Patrick CoffeySep 1, 2025
  If the RDX cartridge is not recognized immediately after insertion in your Teac Data Loggers, turn the WX-7000’s power off and then on again.
J
Jared MitchellSep 4, 2025
How to fix Teac WX-7000 if power will not turn on?
- M
  Michael BaldwinSep 4, 2025
  If your Teac Voice Recorder is not turning on, there are a couple of things to check. First, make sure the power adapter is properly connected. Second, verify that the DC power supply voltage is appropriate.
U
upittsSep 6, 2025
Why WX Navi does not recognize the Teac Voice Recorder WX-7000?
- N
  Nicole CobbSep 6, 2025
  If WX Navi is not recognizing the WX-7000 Teac Voice Recorder, consider these potential causes: * Ensure the LAN cables are correctly connected. * Verify the IP address and subnet mask settings are correct. * Check if the computer’s firewall is blocking the device. Additionally, try turning the WX-7000 power supply off and on again, then restart WX Navi.
K
Katherine RossSep 9, 2025
What to do if Teac WX-7000 Voice Recorder main unit buttons do not function?
- B
  bhillSep 9, 2025
  If the main unit buttons on your Teac Voice Recorder are not functioning, first check if the panel is locked and unlock it. Also, note that the buttons are disabled during WX-Navi operation; after interrupting transmission with WX-Navi, button use will be possible again after at least 3 minutes.

Teac WX-7000 Specifications

General

Microphone	Built-in stereo microphone
Model	WX-7000
Category	Voice Recorder
Recording Format	MP3
Sampling Frequency	44.1kHz
Bit Depth	16-bit
Input	External microphone input (3.5mm mini jack)
Output	Headphone output (3.5mm mini jack)
Storage	MicroSD card
Dimensions	120mm

Related product manuals

Teac WX-7000 Quick Start Guide

Table of Contents

Other manuals for Teac WX-7000

Questions and Answers:

Teac WX-7000 Specifications

Related product manuals