TEC MA-516-100 SERIES - 16 Daily Operation Flow; Before Opening the Store; During Business Hours; After Closing the Store

- 35 -
EO1-11116
MA-516-100 SERIES
16. Daily Operation Flow
The following shows a typical daily operation flow on the register.
Before Opening the Store ...
• Ensure that the register is firmly plugged in
the wall outlet.
• Check if enough portions of Receipt and Journal
rolls are left.
• Check the time, date, and print condition.
Check the time, date, and print by issu-
ing a No-sale Receipt. ...
Setting the time or date ...
During Business Hours ...
Opening the store
• Transaction entries on the register
• Taking Read (X) Reports periodically.
Closing the store
After Closing the Store ...
• Taking Daily Reset (Z) Reports
• Tear off the print portion of Journal Paper (op-
tional).
• Leave the drawer open, and turn the Mode Lock
to “OFF”.
• Take all the cash and other contents from the
drawer to the office with the torn Journal and
printed Reset Reports.
Reference
Chapter
5
10
18
12
18 to 20
21
21
24
24