- 37 -
EO1-11116
MA-516-100 SERIES
2. If the [LOG/RECEIPT] key is simply depressed without a prior numeric entry or with only any
Declaration Key (such as [RTN MDSE]), the Receipt ON/OFF function is activated (refer to
“Receipt-issue/Non-issue Selection” in the next Chapter) but not Sign ON/OFF.
3. If the Cashier Identitying Function “NOTHING” (SET status) is selected (refer to Chapter “22.
System Option Setting,” Address 2 - Bit 8 on page 120), an error will result on a Sign On
or Sign OFF attempt.
Sign ON Receipt Format Sign OFF Receipt Format
(2) Cashier Push Key Method
This method is applied when four push stay-down keys are installed as cashier keys.
1 2 3 4 Each key (1 to 4) is assigned to each cashier. The register will not
operate in the REG, MGR, or - mode unless of these keys is pushed
held down.
NOTES 1. When this method is adopted, the signing function (“LOG” function) of the [LOG/RECEIPT] key
is deactivated. Accordingly, the key is only used as Receipt ON/OFF switch.
2. No receipts are issued on turning ON or OFF a Cashier Key. However, the Cashier Code (1 to
4) is printed near the bottom of every receipt to be issued.
Cashier Code (1 to 8)
The signed-ON Cash-
ier Code is printed on
every sale receipt.
(The Secret Code
portion is never
printed.)
Sign OFF Code
(always 0)
To Next Page
Loading...
