20 44 1705 001GB-H FMT 3 meter
4 Operating the FMT 3
The FMT 3 is operated using three keys: "Reset" (2), "Mode" (3), and "Light" (1). Information is shown
on the LCD display (4) with a permanently visible display.
Upon delivery, the meter is factory-configured with the unit "liters" and the calibration factor
"1.000". The accuracy of the display can be increased through calibration, and the unit of
measurement can also be changed (see chapter 5). After installation, the meter is ready to measure
dispensations without requiring further configuration.
1
To Next Page
Loading...