TECALEMIT FMT 3 - Setting the Medium Conveyed

44 1705 001GB-H FMT 3 meter 25
"Reset" key: Toggles between the units liters (L), US gallons (US GAL), US quarts (US QTS), US
pints (US PTS), imperial gallons (IMP GAL), imperial quarts (IMP QTS) and imperial
pints (IMP PTS).
"Mode" key: Confirms the volume unit shown and switches to
Fluid selection
.
5.3 Setting the medium conveyed
The FMT 3 meter is configured with two optimized characteristic curves for watery media such as
water or AdBlue, as well as for thin mineral oils such as diesel or fuel oil at 20 °C. One of these two
characteristic curves can be chosen.
L
U n i t
1n
NP
GAL
U n i t
H2O
F L
v i
D