32 44 1705 001GB-H FMT 3 meter
7 Error messages– What do I do when...
...the battery symbol appears on the display?
Change the batteries. (see chapter 6.2)
...nothing appears on the display?
Ensure that the batteries have been placed in the correct orientation and the battery cable has been
connected to the control circuit board.
Check if the batteries have sufficient charge. Replace batteries if necessary (see chapter 6.2).
…the value on the display does not change, or only moves very slowly?
Free the turbine in the measurement tube of foreign objects.
…the display shows too much or too little?
Check that the permissible flow rate and media specifications are complied with.
Calibrate the meter (see chapter 5.4).
...the illumination no longer works?
Change the batteries. (see chapter 6.2)
To Next Page
Loading...