TECALEMIT FMT 3 - Maintenance; Cleaning the Meter; Changing the Battery

44 1705 001GB-H FMT 3 meter 29
5. Save the new calibration factor and return to
Dispensation mode
.
6 Maintenance
6.1 Cleaning the meter
In the case of dirt or stains on the exterior of the device, clean it carefully using a damp cloth and
mild cleaning agent. Do not use any aggressive (e.g. abrasive, chlorine-containing) cleaning agents or
solvents. The screen of the display may turn milky upon contact with solvents.
6.2 Changing the battery
When the battery symbol appears on the display, it is recommended that the batteries of the FMT 3
be changed as soon as possible. It will be possible to continue using the meter, but the display
illumination will not work.
2000
L
C A L 1 0 2 7
2000
L
1 1 4 2
TOTAL