TECALEMIT FMT 3 - Page 28

28 44 1705 001GB-H FMT 3 meter
2. The dispensation is carried out at a flow speed that is as constant as possible until the
measuring vessel is filled to the defined volume.
3. Switch to programming mode, sub-menu "Calibration" (skip Volume unit and Fluid menus with
the "Mode" key).
4. Adjust the calibration factor until the quantity displayed corresponds to the quantity dispensed
into the measuring vessel.
000
L
1 1 2 3
TOTAL
1947
L
1 1 4 2
TOTAL
1947
L
C A L 1 0 0 0