TechLine z-46 User Manual

ICONS:
Memory zone 1: Appears when the monitor is operated in
memory zone 1.
Memory Zone 2: Appears when the monitor is operated in
memory zone 2.
Weak Battery Mark: Appears when batteries should be
replaced.
Pulse Mark: Shows the pulse rate per minute.
Memory Mark: Shows the number of stored measurements.
Measurement Error: Exceeding measurement range. Measure
again quietly. Wrap the cuff correctly and keep wrist steady
during measurement. If error keeps occurring, return the device
to the local distributor or service center.
Air Circuit Abnormality: Measure again quietly. If error keeps
occurring, contact the customer service center.
Pressure Exceeding 300 mmHg: Switch the unit off and
measure again quietly. If error keeps occurring, contact the
customer service center.
Data Error: Remove and reload the batteries. If error keeps
occurring, contact the customer service center.
28

TechLine z-46 Specifications

General

Brand	TechLine
Model	z-46
Category	Blood Pressure Monitor
Language	English