HELPFUL TIPS
Here are a few helpful tips to help you obtain more accurate readings:
• Do not measure your blood pressure immediately after consuming a
large meal. To obtain more accurate readings, please wait one hour
before measuring.
• Do not smoke or drink alcohol before measuring your blood pressure.
• You should not be physically tired or exhausted while taking a
measurement.
• It is important that you relax during measurement. Try to take 15-
minute rest before taking measurements.
• Do not take measurements if you are under stress or under tension.
• Take your blood pressure at normal body temperature. If you are
feeling cold or hot, wait a while before taking a measurement.
• If the monitor is stored at very low temperature (near freezing), have it
placed at a warm location for at least one hour before using it.
• Wait about 5 minutes before taking the next pressure measurement.
MEASUREMENT PROCEDURES
1. Press the User-Switching key to select Memory Zone 1 or Memory
Zone 2.
32
2. Place the cuff on the wrist. Press the key. All digits will light up,
checking the display functions. The checking procedure will be
completed after about 2 seconds.
To Next Page
Loading...
Need help?
General
