INSTALLING BATTERIES
1. Battery Type: 2 Alkaline LR03 (AAA) size
2. Place your thumb on the side of the battery cover. Pull the battery
cover in the direction of the cuff to open.
3. Install the batteries following (+) and (-) marks.
4. Replace the cover by placing the end tabs of the battery cover in the
slots on the top of the battery compartment. Click in the other end to
secure the battery cover.
Replace the batteries if:
1. The weak battery mark appears in the display.
2. Nothing appears in the display when the power is switched on.
As the supplied batteries are for test only, they may be discharged
earlier than batteries you buy in stores. Replace the batteries in pairs.
Remove batteries when unit is not in use for extended periods of time.
Batteries are hazardous waste. Do not dispose them together
with the household garbage.
29
To Next Page
Loading...
Need help?
General
