24
6.1.7. Groups
(1) Create a Group: Right click the camera ID and select “Create a group”. Enter a
name for the group in the pop-up interface.
(2) Delete a Group: Right click the group name and click "Delete group" to display the
pop-up box.
(3) Add the camera to the appropriate group: Select the camera ID, hold down the
left mouse button to drag the camera to the group, and then release the left mouse
button.
6.1.8. Change the device alias
Set a name that easy to remember for
LAN camera. Right-click the camera ID
and select “Change the device alias” to
set a new name for the camera, as shown.
6.1.9. Dial connection (PPPOE)
Right click the camera ID and select
“Dial connection (PPPOE)”:
Input user name and password of
internet, and click “OK” to save.
6.1.10. Restore default setting
Right click the camera ID and select “Restore the
default setting”, as shown:
REMARKS: Login password, watch password, and
the parameters of the device like camera system,
language, video parameter, will be restored to the
factory setting. All those settings previously saved
will be lost.
The manager for the device will not be changed
back to the default manager.
To Next Page
Loading...
Need help?
General
