30
If user forgets the password, click the restore button (Refer to Section 6.1.10.
“Restore the default settings”) and password will change back to the original
password.
7.3.2. Change management password
REMARK:
Default management password and watch
password equal to the device login password
and Access code on the QR code label.
IMPORTANT:
Default Manager (User) for the camera is
Cam ID / User on the camera label. Manager
position will be changed to other user if other
user clicking in the "Device management"
with the correct management password
(Login/ password on product QR code label).
One user can be the manager for more than
one device.
Input the new management
password (Equal to the login
password in the QR code label),
the new password will replace the
login password of device on QR
code label.
To Next Page
Loading...
Need help?
General
