Technicolor MediaAccess TG788VN User Manual

16
2 GUIDED INSTALL
ATION
DMS-CTC-20120510-0000 v1.0
5 At the end of the installation, the following screen appears:
Select Go to the Technicolor Gateway web interface if you want to go to the MediaAccess Gateway GUI after closing
the wizard. On the MediaAccess Gateway GUI, you can configure all services of your MediaAccess Gateway.
6 Click Finish.
7 The CD menu appears.
CD Menu
On the CD Menu, you can click:
 Initial Setup to connect your computer to the MediaAccess Gateway and configure your local network.
 Reconfigure my Technicolor Gateway to fully reconfigure your MediaAccess Gateway.
 Setup my computer to connect your computer to the MediaAccess Gateway network.
 Documentation to view a list of the documentation that is available for your MediaAccess Gateway.
 Visit technicolor.com to visit the online support sections.
If you reconfigure your MediaAccess Gateway via the CD menu, the MediaAccess Gateway will be reconfigured
from scratch. All your current settings will be lost. If you only want to make small changes to your configuration
(for example, changing the security), we recommended you to do this via the MediaAccess Gateway GUI. For
more information, see “4.1 MediaAccess Gateway GUI” on page 32.
Actual available items depend on the Setup CD delivered with your MediaAccess Gateway.

Technicolor MediaAccess TG788VN Specifications

General

Wi-Fi Frequency Bands	2.4 GHz
Wireless Speed	Up to 300 Mbps
Ethernet Ports	4 x 10/100 Mbps
VoIP	Yes
Wireless Standard	802.11b/g/n
USB Ports	1 x USB 2.0
DSL Interface	RJ11
ADSL Standards	ITU-T G.992.1 (G.dmt) Annex A, ITU-T G.992.2 (G.lite) Annex A
ADSL2 Standards	ITU-T G.992.3 (G.dmt.bis) Annex A, Annex L, Annex M
ADSL2+ Standards	ITU-T G.992.5 (ADSL2+)
Security	WEP, WPA, WPA2
Power Supply	12V DC, 1.5A
VPN	IPSec