Technicolor MediaAccess TG788VN User Manual

54
6 TELEPHONY
DMS-CTC-20120510-0000 v1.0
6.3.1 Activating a Telephony Service on your MediaAccess
Gateway
How can I (de)activate a service on my MediaAccess Gateway?
You can (de)activate services in two ways:
 Via the MediaAccess Gateway GUI.
 Via (de)activation codes on your phone.
Activating a Telephony Service via the MediaAccess Gateway GUI
Proceed as follows:
1 Browse to the MediaAccess Gateway GUI.
For more information, see “4.1 MediaAccess Gateway GUI” on page 32.
2 On the Toolbox menu, click Te l e p h o n y.
3 In the Navigation bar, click Configure.
4 In the Pick a task list, click View Telephony Services.
5 In the Navigation bar, click Configure.
6 Under Telephony services you can now activate or deactivate the services of your choice:
To :
 Activate a service select the check box next to the service.
 Deactivate a service clear the check box next to the service.
7 Click Apply.
Activating a Telephony Service via Your Phone
To (de)activate one of the services just dial the corresponding code on your phone. For example, to activate Call Hold dial
*94; to deactivate the service dial #94.
To know which code to use:
1 Browse to the MediaAccess Gateway GUI.
For more information, see “4.1 MediaAccess Gateway GUI” on page 32.
2 On the Toolbox menu, click Te l e p h o n y.
3 In the Navigation bar, click Configure.
4 In the Pick a task list, click View Telephony Services.
5 In the Te l e p h o n y S e r vi c e s table, you can find the activation and deactivation codes.

Technicolor MediaAccess TG788VN Specifications

General

Wi-Fi Frequency Bands	2.4 GHz
Wireless Speed	Up to 300 Mbps
Ethernet Ports	4 x 10/100 Mbps
VoIP	Yes
Wireless Standard	802.11b/g/n
USB Ports	1 x USB 2.0
DSL Interface	RJ11
ADSL Standards	ITU-T G.992.1 (G.dmt) Annex A, ITU-T G.992.2 (G.lite) Annex A
ADSL2 Standards	ITU-T G.992.3 (G.dmt.bis) Annex A, Annex L, Annex M
ADSL2+ Standards	ITU-T G.992.5 (ADSL2+)
Security	WEP, WPA, WPA2
Power Supply	12V DC, 1.5A
VPN	IPSec