Toolbox
7.4.2 Create a New Security Level
1. On the Firewall page, click Configure on the upper-right corner of the screen.
2. Click the Create a new Security Level shortcut at the bottom of the screen. The
New Firewall Level screen appears.
3. Enter the name for the new firewall security level.
4. Select a security level.
5. Click Apply to save changes.
7.4.3 Set Filter Rules
After you create a new security level, you can set firewall rules.
1. On the Firewall page, click Configure on the upper-right corner of the screen.
2. Click Edit. The Firewall Settings appears.
3. On the Firewall Settings table, click Add.
Wireless ADSL2+ Gateway 36
To Next Page
Loading...
