16
2 Setting up your TG588vv2
DMS3-CTC-25-42 v1.0
2.5 Configure your TG588vv2 services
Step1: Browse to the TG588vv2 web interface
Proceed as follows:
1 Browse to http://192.168.1.1
(this is the default IP address of your TG588vv2) on a computer or device that is currently
connected to your TG588vv2 (either wired or wirelessly).
2 The TG588vv2 web interface appears. By default, you are logged in as guest. This means that some items may be
hidden. To view all items, click Sign In and enter admin as user name and the ACCESS KEY printed on the product label
of your TG588vv2 as password.
Step2: Check you Internet connection
Under Internet Access, check the status of your Internet connection. If it is not connected, click Internet Access, enter the
Username and Password for your Internet connection and then click Save.
Step3: Configure your wireless access points
1 Click Wireless. The Wireless page appears.
2 Change the following settings under Access Point:
a In the SSID name box, type the network name that you want to use for this access point (if you do not want to use the
default one).
b In the Security Mode list under Access Point, select the security mode that you want to use for this access point. We
recommend to use WPA+WPA2-PSK.
c In the Wireless Password box, type the wireless key that you want to use for this access point. The key must consist of
8 to 63 alphanumeric characters. For example: MyKey123.
3 Click Save.
4 Reconnect your wireless client(s) to the TG588vv2 using the new wireless settings.
Do not use WEP or None, since they are not secure.
WPS will be disabled if you select WEP.
To Next Page
Loading...
Need help?
General
