Technicolor TG588v v2 User Manual

23
3 Wireless networking
DMS3-CTC-25-42 v1.0
3.3 Connecting your wireless client by scanning a QR code
Introduction
Your TG588vv2 allows you to generate a Quick Response (QR) code that contains all wireless settings that are needed to
connect to the access point of your TG588vv2. You are then able to connect to the TG588vv2 wireless network by
scanning the generated code.
Target devices
This connection method is typically used for tablets and smartphones.
Requirements
Your wireless client must have:
• Your TG588vv2 is using the default network name (SSID) and wireless key. These settings are also printed on the
product label.
• Your TG588vv2 must use WPA-PSK + WPA2-PSK encryption.
• A camera to scan the code.
• An application (app) to interpret the QR code and connect to a wireless network.
Procedure
Proceed as follows:
1 Browse to the TG588vv2 web interface.
For more information, see “4.1.1 Accessing the TG588vv2 web interface from your local network” on page 29.
2 Click Wireless. The Wireless page appears.
3 Under QR Code, click Generate QR Code.
4 The wireless QR code appears.
You can now:
 Scan the code directly from your screen.
 Print this page and scan the code from paper.
5 Your app shows you the wireless settings included in the QR code and offers you to connect to the corresponding
wireless network.
6 Connect to the network.
NickDJ.co.uk

Technicolor TG588v v2 Specifications

General

Brand	Technicolor
Model	TG588v v2
Category	Modem
Language	English