Technicolor TG588v v2 - Manually connect wireless client

22
3 Wireless networking
DMS3-CTC-25-42 v1.0
3.2 How to manually connect a wireless client
Procedure
To connect a wireless client to the wireless network, configure that wireless client with the wireless settings (network name
and wireless key) of your access point.
If your TG588vv2 is still using the default wireless settings, use the network name (SSID) and wireless key that is printed on
the product label of your TG588vv2 (or product ID card if included).
You can always find back the current wireless settings via the TG588vv2 web interface. For more information, see
“Forgot your wireless key?” on page 53
NickDJ.co.uk