Technicolor TG588v v2 - Set up mobile fallback connection

17
2 Setting up your TG588vv2
DMS3-CTC-25-42 v1.0
2.6 Set up a mobile fallback connection
Mobile fallback
Your TG588vv2 allows you to use a mobile Internet connection as fallback connection for your main Internet connection.
This means that your TG588vv2 will automatically switch to the mobile Internet connection when your main Internet
connection is down.
Your TG588vv2 will automatically switch back to the main Internet connection as soon as it becomes available again.
What do I need?
To set up mobile fallback connection, you need:
• A mobile Internet dongle
• A registered Security Identity Module (SIM) card.
Connect your mobile Internet dongle to the TG588vv2
Proceed as follows:
1 Make sure that the SIM card is correctly inserted in your mobile Internet dongle.
2 Plug the mobile Internet dongle into the USB port of your TG588vv2.
3 Wait for two minutes to allow your TG588vv2 to detect the mobile Internet dongle.
Configure the mobile Internet connection
Proceed as follows:
1 Browse to the TG588vv2 GUI.
For more information, see “4.1.1 Accessing the TG588vv2 web interface from your local network” on page 29.
2 Click the Mobile 3G/4G card header.
Downloading and uploading over the mobile Internet connection may results in additional charges.
Only use the mobile Internet dongles provided by your service provider.
NickDJ.co.uk