Technicolor TG588v v2 - Configuring WPA(2)-PSK Encryption

25
3 Wireless networking
DMS3-CTC-25-42 v1.0
3.4.1 Configuring WPA(2)-PSK encryption
Procedure
Proceed as follows:
1 Browse to the TG588vv2.
For more information, see “4.1.1 Accessing the TG588vv2 web interface from your local network” on page 29.
2 Click Wireless. The Wireless page appears.
3 In the Security Mode list under Access Point, select one of the following modes:
 WPA2-PSK
 WPA-PSK + WPA2-PSK
For more information, see “Encryption types” on page 24.
4 In the Wireless Password box, type a the key of your choice. The key must consist of 8 to 63 alphanumeric characters.
For example: MyKey123.
5 Click Save.
6 Reconnect your wireless client(s) to your TG588vv2 using the new security settings.
For more information, see “3.1 Connecting your wireless client via WPS” on page 20 or “3.2 How to manually connect a
wireless client” on page 22.
NickDJ.co.uk