Technics SA-DA10 Service Manual

file:///C|/Documents%20and%20Settings/Administrateur/Mes%20documents/service/SA-DA10/p01.htm
Frequency response
PHONO RIAA standard curve±0.8 dB
CD, DVD, TV, VCR1, VCR2, VCR3, TAPE 10 Hz-100 kHz,±3 dB
Input sensitivity
PHONO 0.4 mV (3 mV, IHF’66)
CD, DVD, TV, VCR1, VCR2, VCR3, TAPE 27 mV (200 mV, IHF’66)
S/N (IHF A) (VGCA ON)
PHONO 80 dB (80 dB, IHF’66)
CD, DVD, TV, VCR1, VCR2, VCR3, TAPE 113 dB (IHF A, Rated Power, S=2 V)
90 dB (100 dB, IHF’66)
Input impedance
PHONO
47 kΩ
CD, DVD, TV, VCR1, VCR2, VCR3,TAPE
22 kΩ
Tone controls
BASS 50 Hz,+10 to -10 dB
TREBLE 20 kHz,+10 to -10 dB
Subwoofer frequency response (-6 dB) 7 - 200 Hz
Digital input (OPTICAL) CD, DVD, TV
General
Power supply AC 120 V, 60 Hz
Power consumption 310 W
Dimensions (W x H x D) 430 x 180 x 370 mm
(16-15/16” x 7-3/32” x 14-9/16”)
Mass 12.7 kg (28.0 lb.)
Power consumption in standby mode: 1 W
DIN POWER (1 kHz T.H.D. 1%)
2 X 100W (6Ω)
Notes:
1. Specifications are subject to change without notice./Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum analyzer.
* Manufactured under license from Dolby Laboratories.“Dolby”,“Pro Logic” and the double-D simbol are trademarks of Dolby Laboratories.
** Manufactured under license from Digital Theater System.“DTS” and“DTS Digital Surround” are trademarks of Digital Theater Syatem.
© 2000 Matsushita Electronics (S) Pte. Ltd. All rights reserved. Unauthorized copying and distribution is a violation of law.
•@
TOP NEXT
file:///C|/Documents%20and%20Settings/Administrateur/Mes%20documents/service/SA-DA10/p01.htm (3 of 3) [21/01/2007 13:46:55]

Technics SA-DA10 Specifications