Technics SA-DA10 Operating Instructions

Technics SA-DA10

52 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

AV Control Stereo Receiver

Operating Instructions

Model No.

SA-DA10

SA-DA8

The photographs show the gold version of SA-DA8.

Model SA-DA10 is only for the United Kingdom.

The black version of SA-DA8 is only for the United Kingdom.

Note:

“EB” on the packaging indicates the United Kingdom.

Before connecting, operating or adjusting this product,

please read these instructions completely.

Please keep this manual for future reference.

RQT5518-B

EB GN

Table of Contents

Other manuals for Technics SA-DA10

Service Manual149 pages

Operating Instrutions59 pages

Questions and Answers:

W
whitejulieAug 19, 2025
What to do if my Technics Stereo Receiver shows 'OVERLOAD' and no sound?
- K
  kristenkhanAug 20, 2025
  The 'OVERLOAD' message indicates the protection circuitry has been activated. This can occur if the speaker wires are shorted, speakers with a lower impedance than the unit's rating are being used, or the speakers are under strain due to excessive volume, power, or high temperature. To resolve this, switch off the unit, identify and fix the underlying cause, then switch it back on. Ensure you are using speakers with the correct impedance rating.
J
Jennifer ContrerasAug 21, 2025
Why is there no sound coming from my Technics Stereo Receiver?
- P
  Peter BarnesAug 21, 2025
  Several factors could cause this. First, check if the speaker indicators are off and turn them on. Ensure the tape monitor function is off by pressing the tape monitor button. Also, verify that the muting function is off by pressing the muting button on the remote control. Check all connections to speakers and external equipment to ensure they are complete and correct. Make sure the correct input source is selected. Finally, if you are playing digital signals, ensure this unit can decode them or switch to ANALOG input.

Technics SA-DA10 Specifications

SA-DA10
SA-DA8

SA-DA10

Power

power supply	AC 230–240 V, 50 Hz
power consumption	270 W
power consumption in standby mode	2 W

Amplifier Section

power output at 240 V	2 x 100 W (6 Ω)
continuous power output	2 x 80 W (6 Ω)
total harmonic distortion	0.09 % (6 Ω)

Weight and Dimensions

dimensions	430 x 180 x 370 mm
mass	12.7 kg

SA-DA8

Power

power supply	AC 230–240 V, 50 Hz
power consumption	270 W
power consumption in standby mode	2 W

Amplifier Section

power output at 240 V	2 x 100 W (6 Ω)
continuous power output	2 x 80 W (6 Ω)
total harmonic distortion	0.09 % (6 Ω)

Weight and Dimensions

dimensions	430 x 158 x 370 mm
mass	11.7 kg

Related product manuals

Preview: Technics SA-DX940

Technics SA-DX940

Preview: Technics SA-DX950

Technics SA-DX950

Preview: Technics SA-DX930

Technics SA-DX930

Technics SA-DX1040

Preview: Technics SA-700

Technics SA-700

Technics SA-310

Technics SA-GX530

Preview: Technics SA-AX540

Technics SA-AX540

Technics SA-EX300

Technics SA-GX350

Preview: Technics SA-AX720

Technics SA-AX720

Preview: Technics SA-GX505

Technics SA-GX505