Technics SA-DA10

41
RQT5518
To operate a cassette deck
To operate a CD player or MD deck
To turn the CD player ON/OFF
To turn the MD deck ON/OFF
Only for the United Kingdom
To start play from the desired track
To stop play
[5 CD changer only]
To start play from the desired disc
[MEGA CD changer only]
To start play from the desired disc
“MEGA CD changer” means any Technics CD changer that takes
more than 50 discs.
(When selecting discs, [≥10/ENTER, -/--] (SA-DA10) or [≥10/-/--]
(SA-DA8) does not respond to touch.)
For your reference
If you press this button instead of [ ] shown in the above
procedure, the CD changer will stop and display the disc number. To
start the disc, press [ ].
To skip a track
To start play
To turn the cassette deck ON/OFF
Only when using a double cassette deck
To select the tape deck (DECK 1/DECK 2)
To start play
To stop play
While the tape is stopped
To fast-forward or rewind the tape
(Example: Track 1) (Example: Track 10)
within 10 seconds
Remote control
1
0
≥10/ENTER
1-/--
With TPS-equipped cassette decks, you can move to the beginning
or end of a track by pressing these buttons while the tape is playing.
Note
The remote control for Australia and New Zealand does not have an
[MD] button.