8.3.1 U70 CD, U70 DECK/(displayed
automatically)
TOP PREVIOUS NEXT
Problem or condition
A bus-line communications error has occurred as a result of the flat cables being inserted incorrectly,
thus preventing the system from operating.
1. If U70 is displayed on the tuner/amplifier, the tape deck or CD Player cannot be operated by
remote control.
Correction Procedure
1. To check for correct insertion of flat cables.
2. Insert each connector until you hear a click.
3. Insert the flat cables at the back of the unit in the order indicated. Refer to
Fig. 8-2.
Make sure the white side of the cable is on your right side. Refer to Fig. 8-3.
Fig. 8-2.
Fig. 8-3.
To Next Page
Loading...
