Technics SA-GX350 User Guide

Operating the receiver
Technics
J
Basic operations
To turn the power supply
ONIOFF
To turn the tape monitor
function ON/OFF
To select an Input
source
To select the Dolby Pro
Logic mode
To adjust the output
level of the rear
speakers
To adjust the output
level of the center
speaker
To mute the sound level
To adjust the volume
level
-IB
Once the power has been set to ON, it can be
turned ON and OFF simply by pressing
POWER.(See _ below.)
To listen to sources other
TAPE
than a tape or DCC, be sure to
turn off the tape monitor in-
dicator on the main unit.
CO VCR1
Changes as follows each time
the button is pressed.
r* SURROUND --_ 3 STEREO --* (OFF).
Select SURROUND.
-- CENTER_
"D
Select SURROUND
or 3 STEREO.
MUTING
Press once more to return to
the original volume.
-- VOLUME +
m
After carrying out the operation on the reverse page for turning the power of
the TV or VCR ON or OFF, always press TUNER before pressing POWER when
turning the power of the receiver ON and OFF.
To listen to radio broadcasts
_1' 6 7 8 9 0
Specify the preset channel
using the numeric buttons.
(Example: Channel 12)
1 2
(Within 2 sec.)

Technics SA-GX350 Specifications

General

Brand	Technics
Model	SA-GX350
Category	Stereo Receiver
Language	English