Technics SC-C70 User Manual

54
Operations
Using digital audio output
device
You can connect a DVD player, etc. with
optical digital audio cable (not supplied) and
play back music.
Optical digital audio
cable
(not supplied)
DVD player, etc.
1 Disconnect the AC mains lead.
2 Connect this unit and a DVD player etc.
3 Connect the AC mains lead to this unit.
(⇒ 25)
4 Press [
] to turn this unit on.
5 Press [>SELECT<] repeatedly to select
“OPT”.
6 Start playback on the connected device.
Note
• The digital audio input terminal of this unit can
only detect the following linear PCM signals. For
details, refer to the operating instructions of the
connected device.
 Sampling frequency:
32/44.1/48/88.2/96 kHz
 Number of quantisation bits:
16/24 bit

Technics SC-C70 Specifications

General

Connectivity	Bluetooth
Inputs	USB, Optical Digital
Supported Audio Formats	WAV, FLAC, DSD, AIFF, ALAC, AAC, MP3
Speaker System	2-way
Wireless Connectivity	Bluetooth
Streaming Services	Spotify, TIDAL, Internet Radio
Power Supply	AC 220-240 V, 50 Hz
Type	All-in-One Music System