13
Basic operations
RQT5355
[
M
][
N
]
B
»
M, N
g
a
b
c
d
e
8cm CD
12cm CD
A
CDs
To stop the disc
Press [º].
To pause play
Press [;] during play. The “!” indicator flashes.
Press [;] or [!] to resume play.
Skipping tracks
Press [4] (backward), or [5] (forward).
Searching through tracks
During play
Press and hold [4] (backward), or [5] (forward).
“NO DISC” is displayed
When the unit is in CD mode but a disc isn’t in the playing position
(SC-EH760) or in the player (SC-EH560).
Note
³Skipping is done in the selected order in program play (➡ page 14).
³You cannot skip to tracks already played in random play
(➡ page 15).
³You can search only within tracks in program and random play.
»
A
CD selection
Choose discs with this mark (a).
Do not;
³use irregularly shaped discs (b).
³attach extra labels and stickers.
³use discs with labels and stickers that are coming off or with adhe-
sive exuding from under labels and stickers (c).
³attach scratch-proof covers or any other kind of accessory.
³write anything on the CD.
³clean CDs with liquids. (Wipe with a soft, dry cloth.)
³use CDs printed with label printers available on the market.
»
B
To prevent damage
Always observe the following points.
³Load only 1 CD per tray (d).
³Load CDs as shown in figure (e).
An adaptor is not needed with 8 cm CDs (singles).
³Set the system on a flat, level surface.
³Always unload all CDs before moving the system.
Do not;
³set it on top of magazines, inclined surfaces, etc.
³move the system while tray is opening/closing, or when loaded.
³put anything except CDs in trays.
³use cleaning CDs or CDs which are badly warped or cracked.
twice once
Play position
once twice
Track Track Track
To Next Page
Loading...
Need help?
General
