Technics SC-EH560

Changing sound field and quality
RQT5355
28
CENTER
EFFECT
SURROUND
EFFECT
A
B
1
1 11 2 22
2
11
22
MULTI
CONTROL
MULTI
CONTROL
H
AV EFFECT
SLEEP PROGRAM
1 2 3
4 5 6
7 8 9 0
j/-/--
CANCEL
U VIRTUAL S.WOOFERSIMULATED
STEREO
3D AI EQ/M.EQ BAND
EQ
3
2
1
Surround effects [SC-EH560]
These effects are available when the corresponding indicators are
alight.
»
A
CENTER EFFECT
1 Press [CENTER EFFECT].
The indicator flashes green.
2 While the indicator is flashing (within 10 seconds)
Press [3] (to increase level) or [4] (to
decrease level).
There are three levels.
To cancel
1 Press [CENTER EFFECT] so the indicator flashes green.
2 Press [CENTER EFFECT] again while the indicator is flashing so
it turns orange.
On the remote control
1 Press [AV EFFECT].
2 Press [2] or [1] so the “CENTER EFFECT” indicator flashes.
3 Press [3] (to turn on or increase level) or [4] (to decrease level).
To turn it off, after steps 1 and 2 press [4] so the indicator turns
orange.
»
B
SURROUND EFFECT
1 Press [SURROUND EFFECT].
The indicator flashes green.
2 While the indicator is flashing (within 10 seconds)
Press [3] (to increase level) or [4] (to
decrease level).
There are three levels.
To cancel
1 Press [SURROUND EFFECT] so the indicator flashes green.
2 Press [SURROUND EFFECT] again while the indicator is
flashing so it turns orange.
On the remote control
1 Press [AV EFFECT].
2 Press [2] or [1] so the “SURROUND EFFECT” indicator flashes.
3 Press [3] (to turn on or increase level) or [4] (to decrease level).
To turn it off, after steps 1 and 2 press [4] so the indicator turns
orange.