31
Recording operations
RQT5355
3
1
2
2
3
1
DOLBY NR
REV MODE
E
OPEN
Î
NR
2
2 ÎNR
Before recording (Deck 2 only)
Preparatory steps
Do these steps before each recording.
Wind up the leader tape in deck 2 so recording can begin imme-
diately.
1 Press [< OPEN] on deck 2 and insert
the cassette.
Insert the cassettes on both decks for tape-to-tape recording
(➡ page 33).
DECK 1: For playback
DECK 2: For recording
2 Press [DOLBY NR] to select Dolby NR
on (“ëNR” appears) or off.
(➡ “Dolby noise reduction” page 19)
3 Press [REV MODE] to select the re-
verse mode.
Each time you press the button:
h: One side only records.
d and f: Both sides record (forward> reverse).
“f” automatically changes to “d” when [´ REC PAUSE],
[EDIT] or [TAPE EDIT] is pressed.
Forward side
Tape facing down
To Next Page
Loading...
Need help?
General
