Technics SC-EH560

35
Timer operations
RQT5355
2–4
2
3
4
1
1
2
1
2
SET
CLOCK/TIMER
@ DEMO
SET
6
6 1 2–4
œPLAY/œREC
5
FREC
FREC
FREC
FRE
C
CH
? TUNING @
FREC
FREC
MHz
H/I
Using the timers
The record timer
This timer records the radio at the set time.
The example shows settings for recording preset channel 8 from
18:30 to 19:30.
Preparation: Turn the unit on, set the time (➡ page 11), preset
radio stations (➡ page 17).
1 1 Press [CLOCK/TIMER, –DEMO] to
select “FREC”.
Each time you press the button:
CLOCK>FPLAY>FREC>Original display
^-------------------------------------------------------------------}
2 Press [SET] within 3 seconds.
2–4
1 Press [TUNING (X or W)] to select
the condition required and
2 press [SET].
2 Select the start time.
3 Select the finish time.
4 Select the preset channel.
The record timer is now on standby. The display shows each
condition again then restores the original display.
5 Prepare for recording.
1 Insert a tape into deck 2.
2 Select the Dolby NR mode.
3 Select the reverse mode.
4 Select the tape direction.
6 Press [ê/I] to turn the unit off.
“FPLAY/FREC” indicator remains illuminated to show the
record (or play) timer is on even when ECO mode is selected
(➡ page 11).
Recording starts 30 seconds before the set time with the volume mut-
ed during the set time.
To cancel the timer
Press [FPLAY/FREC] so “FREC” goes out.
Each time you press the button:
FPLAY>FREC>FPLAY FREC>Light off (OFF)
^---------------------------------------------------------------------------------}
The record timer function will be canceled, but the settings stay in the
memory.