Technics SC-HD310

20
RQT5296
Recording operations
Recording the radio
A
Preparation: Do the preparatory steps (
a
page 19).
1 Tune to the required station.
(
a
page 12 or 13)
2 Press [● REC PAUSE].
The deck goes into the recording standby mode, [● REC
PAUSE] indicator lights and a play indicator starts flashing.
3 Press [
vv
] or [
uu
] to start recording.
u: to record on the forward side
v: to record on the reverse side
To stop recording
Press [■].
To temporarily stop recording
Press [● REC PAUSE].
The deck goes into recording standby mode.
Press the [v] or [u] button with the flashing indicator to resume
recording.
Recording CDs
Preparation: Do the preparatory steps (
a
page 19).
11 Insert a CD.
(
a
page 16)
22 Press [
vv
] or [
uu
] then [■] to set the
tape direction.
u: to record on the forward side
v: to record on the reverse side
33 Press [● REC PAUSE].
The deck goes into the recording standby mode, [● REC
PAUSE] indicator lights and the play indicator starts flashing.
44 Press [
uu
] on the CD player.
Recording starts automatically.
Four seconds after the CD finishes, the deck goes into the
recording standby mode.
To stop recording
EITHER
Press [■] on the CD player.
The deck goes into the recording standby mode four seconds later.
OR
Press [■] on the deck.
Recording stops immediately but the CD continues to play.
To record programmed tracks.
Program tracks after step 1 (
a
step 1 and 2, page 18).
Normal recording
B
23
■
■
A
2
3
REC PAUSE
22
REC PAUSE
33
44
B