22
RQT5744
Timer operations
Using the timers
This timer starts play of the selected source at the selected time.
The example shows settings for preset radio channel 3 to play
between 6:30 and 7:40, at –40 dB.
Preparation: Turn the unit on, set the time (
a
page 11), preset
radio stations if you want the timer to start playing the
radio (
a
page 13).
1
qq
Press [CLOCK/TIMER] to select
“z PLAY”.
ww
Press [SET] within 10 seconds.
2
qq
Press [TUNE/TIME ADJUST (2 or 1)]
to select the condition required and
ww
press [SET].
Repeat steps q and w to complete items q to r.
q Select the start time.
w Select the finish time.
e Select the source.
If you select TUNER
Select a preset channel.
r Select the volume.
The timer is now on standby. The display shows each
condition again for 3 seconds each then restores the original
display.
Confirm the [z PLAY/z REC] indicator lights and that
“z PLAY” lights on the display.
3 Press [8] to turn the unit off.
The timer starts at the set time with the volume increasing
gradually to the set level.
To cancel the timer
Turn the unit on.
Press [z PLAY/z REC] so “z PLAY” goes out.
Each time you press the button:
The timer function will be canceled, but the settings stay in the
memory.
To Next Page
Loading...
Need help?
General
