Technics SC-HDA710 User Manual

23
RQT5479
1 Press [MARKER]
during play.
“✽” indicates markers available.
Press again to cancel.
2 Press [ENTER] at
the point you want
to mark.
“✽” changes to a number. Press the cursor buttons ( ) to
highlight another available marker.
Press [MARKER] to clear the display.
This feature allows you to mark a specific point on a disc so you can
return to it easily at a later time. It only works if the elapsed playing
time of the disc you are playing is shown on the unit’s display.
1 Press [MARKER].
2 Press cursor
buttons ( ) to
highlight the
marker.
3 Press [ENTER] to
recall the position.
Play resumes from the marked
position.
To clear a marker
1. Press [MARKER].
2. Highlight the marker you want to clear and press [CANCEL].
¡This feature can not be used with some DVDs or when “PBC”
(
a
Page 21) is on.
¡Some subtitles or pictures may fail to appear around the marker
(DVD).
¡Markers are cleared when you turn off the unit or open the disc
tray.
¡Markers are cleared when you change the input mode.
Note
Marking a position you want to play
again: MARKER
Marking a position
Playing from a marked position
By calling up menus during play, you can start play from a specific
title or chapter.
Menu content depends on disc. These operating instructions
describe the basic steps.
While stopped or playing
1 Press [TOP MENU]
or [MENU].
A menu screen is displayed.
(Press again to return to what
you were watching with some
discs.)
2 Select an item with
the cursor buttons
( ) and press
[ENTER] to confirm
the selection.
You can select items with the numbered buttons with some
discs.
Repeat if another menu is shown.
DVDs can have several menus. The menu displayed by pressing
[TOP MENU] may be different to the menu displayed by pressing
[MENU].
Using menus to play
∗ ∗ ∗ ∗ ∗
1
∗ ∗ ∗ ∗
1 2 3
∗ ∗
1 2 3
∗ ∗
1 2 3
∗ ∗
Disc operations
Symphony No.9
The first
movement
The third
movement
The second
movement
The fourth
movement
1
3
2
4
Symphony No.9
The first
movement
The third
movement
The second
movement
The fourth
movement
3
2
4
1
DVD-A DVD-V VCD CD
DVD-A DVD-V

Technics SC-HDA710 Specifications