Using the timers
36
RQT5479
Timer operations
This timer starts play of the selected source at the selected time.
The example shows settings for preset radio channel 3 to play
between 6:30 and 7:40, Friday at –40 dB.
Preparation: Turn the unit on, set the time (
a
page 12), preset
radio stations if you want the timer to start playing the
radio (
a
page 15).
1
qq
Press [CLOCK/TIMER, –DEMO] to
select “ PLAY.”
ww
Press [SET] within 5 seconds.
2
qq
Press [TUNE/TIME ADJUST ( or )]
to select the condition required and
ww
press [SET].
Repeat steps q and w to complete items q to t.
q Select the day.
w Select the start time.
e Select the finish time.
r Select the source.
If you select TUNER
Select a preset channel.
t Select the volume.
The timer is now on standby. The display shows each
condition again for 3 seconds each then restores the original
display.
Confirm the indicator next to [ PLAY/ REC] lights and
that “ PLAY” lights on the display.
3 Press [ /I] to turn the unit off.
The timer starts at the set time with the volume increasing
gradually to the set level.
To cancel the timer
Turn the unit on.
Press [ PLAY/ REC] so “ PLAY” goes out.
Each time you press the button:
PLAY→ REC→ PLAY REC→off (no display)
↑
The timer function will be canceled, but the settings stay in the
memory.
To Next Page
Loading...
