Technics SE-CH530 Service Manual

SE-CH530 |
@ Stacking the Components
@ install the various components as shown in the illustration.
® To produce a better stereo sound, install both speakers away from the system.
Vertical stacking
Horizontal stacking EY
CD player
Tuner/sound processor
Left speaker Right speaker
Tuner/sound processor
Amplifier
f=)
= =
aR
—
Cassette deck Amplifier
Cassette deck CD player
m@ Connections
Right speaker
Left speaker
ST-CH530
SL-CH530
Connecting Disconnecting
RS-CH730
System connections
Connect the AC power supply cord after you have connected all To disconnect the-flat cable, hold the connector as shown in the
other cables. illustration, and pull it out.
y
|
Connect
the
flat
cables.
After
connection,
fold
and
press
the
cable
as
flat
to
the
back
of
Hold
the
connector
with
the
recessed
part
up
and
press
in
at
the
unit
as
possible.
(To
minimize
noise
pickup
while
listening
the
center
until
you
hear
a
Click.
an
AM
broadcast)
1.
Connect
the
shorter
flat
cable
to
the
terminal
of
the
A1
and
A2. Do not try connecting or disconnecting the flat
2. Connect the longer flat cable to the terminal of the B1 and cables while the power is switched to ON.
B2.
3. Connect the longest flat cable to the terminal of the C1 and
C2.

Technics SE-CH530 Specifications

General

Brand	Technics
Model	SE-CH530
Category	Amplifier
Language	English