Technics SL-1200GR2

Maintenance
Specifications
General
Power supply AC 220 - 240 V, 50/60 Hz
Power
consumption
11 W (ON)
0.3 W (OFF)
Dimensions
(W×H×D)
453 x 173 x 372 mm
Weight Approx. 11.5 k
g
Operating
temperature
range
0 °C to 40 °C
Operating
humidity range
35 % to 80 % RH
(no condensation)
Turntable section
Type Direct drive manual
turntable
Drive method Direct drive
Motor Brushless DC motor
Turntable Aluminium diecast
Diameter: 332 mm
Weight: Approx. 2.5 k
g
(including a rubber sheet)
Turntable speeds 33-1/3, 45 and 78 rpm
Pitch adjustment
range
±8 % and ±16 %
Starting torque 2.2 k
g
-cm
Build-up
characteristics
0.7 s. from standstill to
33-1/3 rpm
Braking system Electronic brake
Wow and flutter 0.025 % W.R.M.S.
Tone arm section
Type Static Balance
Effective length 230 mm
Overhang 15 mm
Tracking error
angle
Within 2° 32' (at the outer
groove of 30 cm (12“)
record)
Within 0° 32' (at the inner
groove of 30 cm (12“)
record)
Offset angle 22°
Arm-height
adjustment range
0 – 6 mm
Stylus pressure
adjustment range
0 – 4
g
(direct reading)
Head shell weight Approx. 7.6
g
Applicable
cartridge weight
range
(Without auxiliary weight)
5.6 to 12.0
g
3.1 to 9.5
g
(using cartridge
spacer)
14.3 to 20.7
g
(including
head shell)
(With auxiliary weight)
10.0 to 16.4
g
7.5 to 13.9
g
(using
cartridge spacer)
18.7 to 25.1
g
(including
head shell)
Cartridge
Mounting
Dimension
12.7 mm (1/2“) interval
Head shell
terminal lug
1.2 mm
φ
4-pin terminal lug
Specifications are subject to change without
notice.
27
SL-1200GR2EBTQBM0908.indd28SL-1200GR2EBTQBM0908.indd28 2023/06/3013:10:462023/06/3013:10:46