2.1 Handling of traverse deck (optical pickup)
TOP PREVIOUS NEXT
1. Do not subject the traverse deck (optical pickup) to static electricity as it is extremely sensitive
to electrical shock.
2. To protect the laser diode against electrostatic breakdown, short the flexible board (FFC
board) with a clip or similar object. Refer to
Fig. 2-1.
3. Take care not to apply excessive stress to the flexible board (FFC board).
4. Do not turn the variable resistor (laser power adjustment). It has already been adjusted. Refer
to
Fig. 2-1.
Fig. 2-1.
•@
TOP PREVIOUS NEXT
To Next Page
Loading...
