Technics SL-HD301

SL-HD301 / SL-HD501
i Removal of the FFC board
tep
Rotate the gear. >< Push the top of the connector in the direction
of arrow ©, and then pull out the FFC board
Pull out the in the direction of arrow @.
disc tray.
Top of the connector FEC board
NOTE
FFC
board
Insert a short pin into the traverse
unit FFC board.
(Refer to “Handling Precautions for
Traverse Deck” .) Short pin
1. Widen the boss using —2. Pull out the pinin the
Release the 2 claws. a regular screwdriver. direction of the arrow.
Screwdriver t
Pull out
Boss (> o the pin.
Pull out the disc tray.
GD ©
@x2
|
risa
Traverse
deck
ass'y
(CN701). LOREM Rel Spring (Sliver)
Spring (Silver)
Unsolder
Be careful not to lose the 3 springs Removethne claw.
because those will also be removed
on removal of the traverse deck ass'y.