Technics SL-P202A - Location of Controls; Search Buttons

SL-P202A
m LOCATION OF CONTROLS
Control section
0 Power switch (power)
If a disc has already been loaded, play will begin when
the power is turned ON.
@ Disc holder
© Time mode select button (time mode)
4) Buttons for edit function ( [edit] )
eEdit tape length button (tape length)
When compact discs are to be recorded to tape, this button
can be used to calculate the number of tracks that can be
recorded on each side of the tape, depending on the length
of the cassette tape used, so that as little tape as possible is
wasted.
eTape-side select button (side A/B)
When recording compact discs to tape, this button can be
used to check the number of tracks and amount of tape left
over for side A or B.
®Disc link button (disc link)
This button can be used for edit recording from several
discs.
Random play button (random)
This button can be used to play the tracks on a disc in a
random sequence.
Music scan button (music scan)
This button can be used to play the first part of each track in
order.
Buttons for program function
eProgrammed-play button (program)
Pressing this button initiates the programmed play mode.
You can then enter specific tracks using the skip buttons.
eClear button (clear)
This button can be used to clear tracks from the pro-
grammed sequence one at a time.
Recall button (recall)
This button can be used to display the contents of the
programmed track sequence for confirmation.
@ Auto cue button ([auto cue)
Pressing this button causes the unit to skip automatically to
the beginning of the next track on the disc and switch to the
play standby mode.
9] Repeat button (repeat)
@ Search buttons (<< search >>)
These buttons can be used to move rapidly forward or
backward on the disc during play. The search speed is slow
when the button is pressed at first and becomes faster if the
button is pressed and held continuously.
@ Play button (> play)
@ Pause button (11 pause)
® Stop button (m™ stop)
This button can be used to stop disc play, as well as to cancel
the various play modes.
® Skip buttons ( <4 skip/skip >D )
These buttons can be used to specify the number of the
desired track and the desired recording time of the tape.
® Disc holder open/close button (4 open/close)