Technics SL-P202A - Cleaning of Lens

Ls -°202 8
m CONNECTIONS
Turn power off on all components before making connections.
To “CD” or “AUX”
terminals of the
amplifier
+— AC power supply cord AC outlet
(included)
SSetciee connection cable
(included)
@ CLEANING OF LENS
If the lens is stained causing sound skip or operation failure, Cautions:
open the top cover by pressing the open button, and clean @ Do not directly apply the cleaner solution to the lens.
the lens. Do not apply too much solution to the cotton rod or
otherwise the solution will flow into the player.
e To remove dust or dirt @ Wipe the lens carefully. Do not give too much stress to
Blow the lens with the blower provided in the cleaning kit the lens or otherwise it may scratch the lens or cause
to remove dust or dirt. optical pickup trouble.
@ If the solution should be too much applied, wipe the
lens with a dry cotton rod.
Blower Cotton
Nozzle OF Lens cleaning kit (Part No. : SZZP1038C)
Lens a Lens
Dust or dirt Fingerprint
e To remove fingerprint
If the blower is not enough, moisten the cotton rod
with the lens cleaner solution and wipe the lens with it
from center of the lens to outside.
1 Human body grounding
Use the anti-static wrist strap to relieve the static
electricity from your body.
2. Work table grounding Wrst strap
Put a conductive material (sheet) or steel sheet on the (Anti-stauc bracelet)
area where the optical pickup is placed, and ground the
sheet.
Caution: Vea
The static electricity of your clothes will not be grounded a “TS
through the wrist strap. So, take care not to let your
clothes touch the optical pickup.
Iron plate or some metals
to conduct electricity