19
Basic
Using Bluetooth
®
■
Registering the Bluetooth
®
device
• Turn on the Bluetooth
®
feature of the device
and place the device near this unit.
• If a Bluetooth
®
device is already connected,
disconnect it.
1 Press [ -PAIRING].
• When “Pairing” is indicated on the display,
proceed to step 5.
• By pressing and holding [
-PAIRING] this
unit starts waiting for registering. Proceed
to step 5.
2 Press [MENU].
3 Press [
], [ ] repeatedly to select
“Pairing” and then press [OK].
4 Press [
], [ ] to select “Yes” and
then press [OK].
• “Pairing” is displayed, and this unit waits for
registering.
5 Select “Technics-SU-GX70-
****
” from
the Bluetooth
®
device’s menu.
• The name of the connected device is
indicated on the display.
• The MAC address “
****
” (“
****
” stands
for a character that is unique to each set.)
may be displayed before “Technics-SU-
GX70-
****
” is displayed.
• If the device name is set on the Google
Home app or Apple Home app, the set
name is displayed.
Note
• You can also enter pairing mode by pressing
and holding [
-PAIRING] when the input
source is “Bluetooth”.
• If prompted for the passkey, input “0000”.
• While “Standby Mode” is set to “On”, this unit
automatically turns on when a Bluetooth
®
connection is established to this unit from a
paired Bluetooth
®
device.
■
Listening to music stored on a Bluetooth
®
device
1 Press [ -PAIRING].
• “Ready” or “Pairing” is indicated on the
display.
2 Select “Technics-SU-GX70-
****
” from
the Bluetooth
®
device’s menu.
• The name of the connected device is
indicated on the display.
• If the device name is set on the Google
Home app or Apple Home app, the set
name is displayed.
3 Start playback on the Bluetooth
®
device.
Note
• Set “Auto Reconnect” to “On” to connect the
last connected Bluetooth
®
device automatically
when “Bluetooth” is selected as an input
source.
• This unit can only be connected to one device
at a time.
■
Disconnecting a Bluetooth
®
device
1 Press [MENU].
2 Press [
], [ ] repeatedly to select
“Disconnect?” and then press [OK].
3 Press [
], [ ] to select “Yes” and
then press [OK].
Note
• The Bluetooth
®
device will be disconnected if a
different audio source is selected.
To Next Page
Loading...
Need help?
General
