Need help?Do you have a question about the Technics SU-V500 and is the answer not in the manual?
General| Type | Integrated Amplifier |
|---|---|
| Damping Factor | 60 |
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Channel Separation | 55 dB (Line) |
| Signal to Noise Ratio | 110dB (line) |
| Dimensions | 430 x 125 x 320 mm |
| Speaker Load Impedance | 4Ω to 16Ω |
Pre-operation checks and safety advice for the AC mains lead.
Step-by-step guide to replacing the fuse in the mains plug.
Advice on unit placement, airflow, and avoiding stacking hazards.
Warnings about voltage, power cord care, and preventing foreign object entry.
Guidelines for cleaning the unit and when to contact service.
Description of power switch, standby, and operation indicators.
Explanation of volume, tone, and balance controls.
Controls for selecting audio sources and speaker outputs.
Details on headphone jack and tape monitor functions.
Illustrates connections for tuner, video player, tape deck, and CD player.
Explains the function and connection of the remote control output.
Instructions for connecting speaker cables and recommended impedance.
Information regarding the internal cooling fan's operational behaviour.
Steps for connecting the power cord, including voltage settings for different regions.
Steps to turn on the unit and set the initial volume level.
How to choose speaker outputs and input signals.
Details on the TAPE 1 MONITOR indicator and its purpose.
Recommended steps to take after finishing playback.
Using BASS and TREBLE controls for sound shaping.
Using the BALANCE control for stereo imaging.
How to use headphones and disable speaker outputs.
Steps to record from CD, tuner, AUX to tape decks.
Guide for copying audio between tape decks.
How to check sound during recording with specific tape decks.
Detailed specifications for power delivery and frequency ranges.
Specifications for tone controls, output voltage, and channel performance.
Power consumption, supply, dimensions, and weight details.
Technical data for signal inputs and impedance matching.
Specifications regarding the noise floor for various inputs.
Solutions for lack of audio or incorrect stereo imaging.
Remedies for hum, buzz, or sound from only one speaker.
Troubleshooting steps for sound stopping during playback or on power-on.
Guide on inserting and replacing batteries in the remote control.
Best practices for using the remote control effectively.
How to control the amplifier's power, input selection, and volume.
List of compatible Technics components for remote operation.
Instructions for using the remote to control DCC playback modes.
How to select tracks and manage tape fast-forward/rewind.
How to control tuner operation and channel selection with the remote.
Important notes on battery care, storage, and proper disposal methods.
To Next Page
