PG 14
USE AND CARE
Delayed start / Automatic cooking
If the end time is entered after the cook time has already been set, the cook time and the end time
are calculated and if necessary the oven sets a delayed start point. This can be used for automatic
cooking where the oven will start and end at the chosen time.
1. Turn the oven on and select a function as above.
2. Touch the Time Button several times until the cook time icon
I>I on the display begins to flash.
Example : Current time is 3:00 and the desired cook time is 1 hour.
3. Touch the ‘
+’ or ‘-’ buttons to set the desired end time (1:00)
4. Touch the Time Button again. The end time icon
>I on the display begins to flash.
Example: You want to cook for 1 hour and finish at 8:30.
5. Touch the ‘
+’ or ‘-’ buttons to set the desired end time (8:30)
6. Touch the Time Button again. The oven will be inoperative until the delayed start point.
In this example, the oven will turn on at 7:30, cook for 1 hour and turn o at 8:30.
Kitchen timer
1. Touch the Time Button and the Bell icon on the display begins to flash.
2. Touch the ‘
+’ or ‘-’ buttons to set the desired time
3. After approx 5 seconds, the timer will start automatically.
To Next Page
Loading...
