EasyManua.ls Logo

Technika Professional Series - Troubleshooting and Lamp; Troubleshooting Common Issues

Technika Professional Series
39 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PG 31
Problem Possible cause and remedy
The oven does not heat up
A noise can be heard after
a
cooking programme
The cooling fan remains switched on after the end of a cooking programme.
Cakes and biscuits are
browning unevenly
-The oven may not be switched on. Switch the oven on.
-The clock may not be set. Set the clock.
-Check to see if the required settings have been applied.
-A household fuse may have blown or a circuit breaker may have tripped. Replace
the fuses or reset the circuit. If this happens repeatedly, call an authorised electrician.
There will always be a slight unevenness. If browning is very uneven check that the
correct temperature was set and that the correct shelf level was used.
A fault code appears in the Temperature sensor error
display:HE1 Call local service centre
A fault code appears in the Probe temperature sensor error
display:HE2 Call local service centre
USE AND CARE
Troubleshooting

Other manuals for Technika Professional Series

Related product manuals