PG 28
Pyro Function
USE AND CARE
Self Cleaning Pyro Function
There are 3 time durations to select depending on the degree of self cleaning required:
Standard Degree of self cleaning Duration
1 Low Approx. 2 hours
2 Medium Approx. 2 .5 hours
3 Strong Approx. 3 hours
What we should know
For safety reasons, the oven locks automatically when the Pyro function begins..
You will only be able to open the door again once the temperature has fallen below 250
The exterior of the oven will become very hot. Make sure that nothing is placed against the front
panel.
Keep children at a safe distance.
Never attempt to open the oven during the self cleaning process. The cleaning process may be
interrupted.
Please do not attempt to push in the latch by hand.
You cannot switch the oven light on during self cleaning.
Before self cleaning
Remove all unsuitable racks, trays and accessories and all ovenware from the oven.
Risk of fire. Loose food residue, grease and meat juices are flammable.
Wipe the oven and the accessories that are to be cleaned at the same time with a damp cloth.
Clean the door and along the edges of the oven around the seal. Do not scour the seal.
Make sure that the oven door is closed before you start cleaning.
Cleaning accessories at the same time
The wire grill is not suitable for self cleaning.
Never clean metal sheets and dishes which have been coated with a non stick coating using the
oven‘s automatic self-cleaning function (Pyro function).
High temperatures can cause poisonous gases to be formed from the non stick coating risking
serious damage to your health.
Select the self cleaning function
1. Turn the Function knob (1) anti-clockwise to ‘ ’ to select the Pyro function.
2. Touch the Time Button several times until the Cook Time icon
I>I on the display
begins to flash.
3. Touch the ‘+’ or ‘-’ buttons to set the desired duration.
4. After approx 5 seconds, the function will start automatically
To Next Page
Loading...
